Termina ufficialmente la stagione estiva e come ogni fine estate, oltre a pensare al cambio armadi, a tirare fuori abiti in lana e scarpe di para, ogni automobilista deve programmare la manutenzione dell’auto e predisporla ad affrontare l’inverno nel modo giusto.
THE DO-IT-YOURSELF FOR YOUR CAR
Dealing with lesser issues has never been easier
A well-cared-for vehicle reduces the risks of failures and accidents, since it will react better in a difficult situation!
Furthermore, regular maintenance will preserve your capital, since the resale value of your car shall be higher.
- Check the functioning of the HVAC system
- Check and/or replace the HVAC filter
- Clean the HVAC system with suitable products
Always run a complete check-up of your car.
Every time you set up for a journey, thoroughly check your car before leaving.
It would be advisable to do it at the scheduled dates.
Servicing is generally run after 10,000 to 15,000 Km, or once a year.
The intervals for scheduled maintenance vary from car to car and are described in the User's and maintenance manual.
There are products which are an absolute must for an appropriate thorough cleaning of your car, such as the ones we have listed here, which are available in our shop.
The pressure of your tires depends on the type of vehicle, on the speed and on the load.
Especially before undertaking a long journey, it is advisable to check the pressure when the tires are cold: you will find the right value in the user's instructions or on the vehicle (e.g. on the fuel filler lid).
You do not manage to remove the resin?
You need to use purposely-allocated products, such as...
First: remove the rust from the damaged part with abrasive paper. In case of tenacious rust, use a special product to remove it.
Second: apply a layer of anti-corrosive additive on the sheet metal whence the paint has been removed and plaster with a spatula.
Do not attempt to save on the distribution system: in case of failure, the repairs will be very expensive!
Managing to detect a leakage of the cooling circuit is not easy, since the liquid evaporates quickly and leaves few traces.